Tile and Grout Cleaning, Seal, and Repair
HERO Cleaning offers professional tile and grout cleaning and stone care for Phoenix, Scottsdale, Tempe, Mesa, and the surrounding areas. Our truck-mounted steam cleaning unit provides superior cleaning for dirty and unsightly tile and grout, as well as saltillo tile and even travertine tile cleaning and sealing.
Mops are often a home’s best friend and worst enemy. Although the floor may look cleaner, mops often leaves residue and soap behind that attracts new dirt. Our rigorous scrub and rinse method gets your floors clean and leaves no dirt attracting residue behind, and of course, does not damage your floors.
After the proper cleaning is performed on your tile floor, we have a wide range of option for sealing and protecting your flooring and grout. Travertine floors can benefit from a proper seal as well as saltillo tile which need to be sealed to keep tiles from wear and chipping or flaking.
Ceramic tile, although pre sealed, still has grout that may stain and discolor over time. A new grout may need a clear penetrating seal where as the older homes may need a colored grout sealer that bring back the beauty and brilliance of a older floor.
Whatever you need, HERO Cleaning can help with all of your home and tile cleaning needs. With over 30 years of experience and considered the best professional cleaning company in the Phoenix area, call HERO and leave the work to us. We clean what others can’t or won’t…
Our powerful cleaning process will restore your saltillo tile and natural stone to a like-new condition. The HERO Cleaning process will remove years of soil build-up safely, effectively, and economically, and make even stubborn stains disappear.
Our Six-Step Saltillo Tile and Natural Stone Cleaning Process
1. Pre-treat tile and grout
a. Alkaline based degreasing solution is mopped on
b. Cleaner is allowed to dwell for up to 20 minutes
c. This loosens built-up soil, grease, contaminants, and residues
2. Power scrub surfaces
a. Special brushes agitate the grout lines and the tile surface
b. Edge Cleaning and baseboard cleaning are done at this time
3. Turbo rinse
a. Tile and grout is rinsed using pressure heated water
b. All water, cleaning solutions and contaminants are captured and extracted away in one process.
c. System is completely fluid controlled with no over-wetting of any surfaces or other areas, making it safe for more porous materials, (i.e. Saltillo)
4. Repeat process (Steps 1, 2 and 3 above)
a. Above process is repeated now using a low Ph Restorative cleaner
b. Solution works on staining, discoloration, grout haze, soap scum
5. Speed dry/inspection
a. Remove any remaining water on floor
b. Place high powered air movers to dry tile and grout lines
c. Inspect surface for any staining. Spot clean any stains found
Tile & Grout Cleaning & Restoration
Step One: First we use a simple non-toxic cleaning solution to agitate the dirt that’s ingrained into the floor (that’s why mopping never removes it, allowing it to build up over time).
Step Two: We then use our patented floor tool that applies heated water at just the right pre-selected cleaning pressure in the Containing Dome – pre-selected at a level that precludes any damage. At the same time the water is being applied, it’s also vacuum-extracted at 5 gallons per minute, leaving the surface almost completely dry.
Why waste more time and effort “trying” to clean your hard surfaces the old fashion way? Hero Cleaning offers fast, effective, and affordable solutions that work on any hard surface: natural stone; travertine; brick; concrete; and stucco. We can do it all – vertical or horizontal.
